Multi-function Electric Bed WF-EB03

WF-EB03

Specification:

● Dimensions of the bed body: 2165 (including anti-collision wheels 2200) × Width 1000 (including anti-collision wheels 1110) × 450 - 800mm (350mm lifting travel)

● Width of the bed panel: 900mm, length of the bed panel: 1950mm

Functions:

● Lifting travel of the bed surface from the ground: 450 - 800mm (±10mm)

● Folding angle of the backrest: 0 - 65°

● Bending angle of the legs: 0 - 35°

● Forward and backward inclination angle: 0 - 12°

● Left and right inclination angle of the bed body: 20° ± 2°

● Height of the guardrail above the bed surface: 360mm ± 10mm. The guardrail has an angle indicator to show the inclination angle of the bed surface.

● Bed body load capacity ≥ 300KG.

● Weighing function, weighing deviation ≤ 0.1kg.

● Electric and manual cardiopulmonary resuscitation function. Each side of the bed body is equipped with a manual wrench and a damping device to prevent the backrest from falling suddenly.

● Bed body extension function: The lower leg board extends the bed surface, extension distance: 200mm ± 10mm

● Backward retraction function: The backrest can extend 200mm and is equipped with an inwardly recessed seat board function, which is more in line with ergonomics.

● Rear leg linkage function, one-key chair position function, one-key off-bed function, the backrest can be equipped with X-ray film shooting function.

● X-ray film box bracket is built into the rear panel, which can adjust the position of the X-ray film according to the patient's height.

● Four corners of the bed body have 4 infusion rack sockets, which can also be used as traction frame holes. Each side has 2 sliding drainage hooks, a total of 4.

● Four corners of the bed body are equipped with PP anti-collision wheels, with a diameter of 75mm and a thickness of 46mm, protruding from the bed body, effectively avoiding secondary harm to the patient during bed movement.