Transfer Trolley MT-TT02

MT-TT02

1、 Specification: Total length 2130mm * 760mm * 560/890, bed board length 1880mm, bed board width 620mm

2、 Function: Fold the back up 0-90 °, fold the knee up 0-40 °, and adjust the front and back tilt by -18 ° -18 °.

3、 Characteristics

1. Safe working load: 220KG.

2. Back lifting system: Controlled by 2 high-quality silent gas springs, it has stronger load-bearing capacity and is safer.

3. High and low lifting system: Adopting high-quality dual hydraulic cylinder design, the load-bearing capacity is strengthened, the stability is better, and the operation is easier.

4. The knee lift is operated by an ABS hand crank. The hand crank has over shake protection function.

5. Bed board: Made of 4mm thick anti glare material, it can transmit X-rays, has higher strength, does not deform, and ensures the safety of rescuing patients in emergency situations.

6. Guardrail: Aluminum alloy crossbeam, 304 stainless steel six gear guardrail;

7. Guardrail status: upright, flat, and lowered. Angle display is installed on the guardrail board; There is a groove in the middle of the guardrail on both sides to prevent the catheter from slipping and facilitate infusion and drainage.

8. Casters: Adopting 200mm diameter central control silent casters, the bed has caster control systems at all four corners, with one foot braking and all four wheels fixed at the same time, making it convenient for medical staff to operate.

9. Center fifth wheel system: There are control pedals on both sides of the bed, and the diameter of the center fifth wheel is ≥ 100mm. When retracted, it can move freely; When in use, it is in a "straight" state, effectively controlling the forward direction and making the transportation process safer.

10. Tray: There is an integrated ABS material tray under the bed body, which can hold 4 liters of oxygen cylinders and is easy to use. The tray can bear a weight of 10Kg.

11. Infusion rack sockets: The entire bed is equipped with 8 infusion rack sockets in front and behind, which is more convenient for clinical needs;

12. Mattress: The mattress thickness is ≥ 70mm, making it more comfortable for patients to lie down. The waterproof and breathable fabric is easy to clean, equipped with zippers, and the external fabric can be washed with water.

13. Recording table: There is a recording table at the end of the bed, and the table can be placed horizontally on both the front and back sides, which can be used as a recording table or monitoring table. When not in use, it can be stored and placed without taking up space. Optional

14. Angle meter: There is one angle meter on each side of the bed frame, which displays the front and rear inclination angles of the bed body for special clinical requirements. Optional